|
• Made from 50 mil thick double-coated polyvinyl chloride (PVC) plastic that resists abrasions, fading, and discoloration. Even when exposed to water, chemical spills, ultraviolet rays, or other workplace hazards, it will continuously adhere to floors and remain visible.
• Comes with a 10 mil thick water soluble, rubber based adhesive (that doesn't leave behind any sticky residue like acrylic adhesives) with a durable blue poly release liner. The pressure-sensitive high tack adhesive adheres quickly to floors, yet removes cleanly. The tape can be relocated within the first hour, after that the adhesive sets and a new shape must be reapplied.
• Reflective center line is composed of High Intensity Prismatic retroreflective film which is highly reflective (offering up to three times more reflectance than standard Engineer Grade film) and waterproof with excellent corrosion and solvent resistance.
• Floor shapes have beveled edges that improve durability when exposed to heavy forklift traffic commonly found in indoor industrial environments. The fully tapered edges have a curved surface shape that allows for a smooth transition when stepped on, or rolled over—preventing trip and impact hazards.
• Clean and dry the floor surface before shape installation, any type of cleaner that does not contain acid based properties will work.
• Sturdy and guaranteed to last, Mighty Line is ideal for high traffic areas in your warehouse and can stand up to industrial brush scrubbers, pallet jacks, forklifts, commercial vehicles, pedestrian traffic, and everyday logistic processes.
• Backed by a 3 year warranty, Mighty Line Floor Shapes will remain affixed to floors for a period of 3 years providing that the floor shape is properly applied to a clean, warm (above 55°F), dry and smooth floor surface. Dragging or pushing skids over the top of the shapes will nullify the warranty.
• Installation: prepping the surface to ensure the floor is clean, dry, and not saturated with oil is highly recommended. Before application, the surface temperature should be above 55°F and the shapes should be maintained at a minimum temperature range of 60-70°F until prior to installation.
|
