General Requirements for Wiring Methods and High Voltage
(101993)
Use DANGER - HIGH VOLTAGE - KEEP OUT Signs to meet NEC 300.45, 314.72(E), 490.35(A), 490.55. Choose from OSHA, ANSI, and bilingual formats.
High Voltage Keep Out
OSHA Danger Sign
3.5"x5" to 36"x48"
High Voltage Keep Out (with Graphic)
ANSI Danger Sign
3.5"x5" to 18"x24"
High Voltage Keep Out (Bilingual), Vertical
Bilingual OSHA Danger / Peligro Sign
3.5"x5" to 10"x14"
389.218(H) Cable Trays and Installation
(101996)
When cable trays contain conductors with voltage more than 600 V, they are required to be marked “DANGER — HIGH VOLTAGE — KEEP AWAY” at no further than 10-foot intervals.
High Voltage Keep Away
3.5"x5" to 10"x14"
High Voltage Keep Away
3.5"x5" to 10"x14"
Peligro - Alto Voltaje Mantenerse Alejado
3.5"x5" to 10"x14"
High Voltage Keep Away / Alto Voltaje Mantenerse Alejado
3.5"x5" to 10"x14"
High Voltage Keep Away (with graphic)
3.5"x5" to 10"x14"
Other NFPA 70 Standards
(103322)
Write-on labels and other printed labels are offered in polyester. Choose the material, size, and order quantity on the next page.
Do Not Provide Electrical Power Until The Grounding Electrode(s) is Installed and Connected.
2"x3" to 5"x7"
Turn Disconnecting Switch or Circuit Breaker Off Before Inserting or Removing Plug
2"x3" to 5"x7"
Parts of the Controller are not De-Energized by this switch
2"x3" to 5"x7"
Emergency Systems Grounding Sign
2"x3" to 5"x7"
This Equipment fed by multiple sources
2"x3" to 5"x7"
Volts (Write-in)
2"x3" to 5"x7"
Other NFPA 70 Standards - Custom
(103323)
Use text that perfectly defines your electrical safety message. Make sure you show the exact voltage, amperes, hertz, or any other unit. Customization is free.
This Connection is for heating and/or Air-Conditiong Equipment. Add Your Amperes, Volts and Conductor Ampacity.
Engineered Series Combination System Add Your Amperes, Identify Replacement Components
2"x3" to 7"x10"
Series Combination System Add Your Amperes, Identify Replacement Components
2"x3" to 7"x10"
Underground System Opeartion Add Your Volts Between Conductors
2"x3" to 7"x10"
Add Your Phase and Volts to be Grounded for Switchboard Identification
2"x3" to 7"x10"
Add Your Number of Volts
2"x3" to 7"x10"
Other Related NFPA Signs
(101994)
620.3(A) - Elevators, Dumbwaiters, Escalators, Moving Walks, Lifts & Chairlifts. Voltage Limitations. Power Circuits.
(101997)
Section 3 (A) of Article 620 in the National Electrical Code requires a "DANGER — HIGH VOLTAGE" signage where the voltage exceeds 600 volts.
High Voltage (with graphic on right)
3.5"x5" to 10"x14"
High Voltage
3.5"x5" to 12"x18"
Free shipping* on US orders over $29.95
OSHA Warning Sign : High Voltage - Keep Away Part #:S-2240 10" x 14" HDPE Plastic Sign Verified Purchaseit good
I love my signs.