The products listed below are for the theme 'Do Not Operate Machine Signs'.


Before Working On Any Machine, Be Positive That Disconnect And Starting Switches Are Open And Warning Tags Are In Place
3.5"x5" to 12"x18"
S2-2777
Do Not Enter While Machinery In Motion, May Cause Injury (With Hand And Man Graphic)
3.5"x5" to 12"x18"
S2-2588
Do Not Enter While Machinery In Motion, May Cause Injury (With Stop Hand Graphic)
3.5"x5" to 12"x18"
S2-2587
Do Not Operate, Closer Than 20 Feet To Power Lines
3.5"x5" to 12"x18"
S2-2790
Equipment Being Serviced, Do Not Operate
3.5"x5" to 12"x18"
S2-2780
Equipment Being Serviced, Do Not Operate
3.5"x5" to 12"x18"
S2-2781
Equipment Being Serviced, Do Not Operate
3.5"x5" to 12"x18"
S2-2649

 Bilingual Signs

Do Not Operate / No Operar
3.5"x5" to 10"x14"
S-2511-B

 Door Barricade Sign

Closed For Maintenance / Cerrado Por Mantenimiento
11.25" x 18" (H x W)
S2-1970

 Electrical Safety Signs

Peligro - No Operar
3.5"x5" to 10"x14"
S-2511-S

 Housekeeping Signs

Please Clean Machine After Each Use
3.5"x5" to 10"x14"
S-2395

 Lockout Signs

Do Not Operate
3.5"x5" to 10"x14"
S-2511

 Machine Safety Signs

Do Not Enter When Machine Is In Use / No Entrar Cuando La Maquinaria Esta En Uso
3.5"x5" to 12"x18"
S-6030
Do Not Enter While Equipment Is Operating
7"x10" to 10"x14"
S-2625
Do Not Enter While Machinery In Motion
3.5"x5" to 10"x14"
S-2626
Do Not Operate Controls While This Sign Is In Place
3.5"x5" to 10"x14"
S-2707
Do Not Operate This Machine Unless Authorized
7"x10" to 10"x14"
S-2629
Do Not Operate This Machine Until Fully Instructed by Supervisor
3.5"x5" to 10"x14"
S-0179
Do Not Operate Without Proper Authorization
7"x10" to 10"x14"
S-2630
Do Not Operate, Activation Will Result In Severe Injury Or Death (With Graphic)
3.5"x5" to 12"x18"
S2-0458
Do Not Operate, Man Working on Repairs
3.5"x5" to 10"x14"
S-2691
Do Not Start Engine
3.5"x5" to 10"x14"
S-2694
Do Not Start Machine Being Repaired
3.5"x5" to 10"x14"
S-2692
Do Not Start This Machine
3.5"x5" to 10"x14"
S-2708
Do Not Start, Men are Repairing this Machine
3.5"x5" to 10"x14"
S-2695
Do Not Use Hands To Clean This Machine
3.5"x5" to 10"x14"
S-2693
Equipment Is Not To Be Removed From This Area
7"x10" to 10"x14"
S-2638
If Machine Is Not Operating Properly Advise Supervisor Immediately
7"x10" to 10"x14"
S-2659
Machine Under Repair - Do Not Operate
3.5"x5" to 10"x14"
S-2699
Only Operator Allowed Within 8ft Of Shear During Operation (with Hand Crush Force from Above Symbol)
3.5"x5" to 12"x18"
S-6521
Operation By Authorized Personnel Only
7"x10" to 10"x14"
S-2632
Safety Training Mandatory - Do Not Operate This Equipment Without Authorization
7"x10" to 10"x14"
S-2633
To Be Operated By Authorized Personnel Only
7"x10" to 10"x14"
S-2634

 Portable Signs And Bases

Quiet - Training In-Progress
24"x26"
K-Roll-1213

 Safety Signs - ANSI

Do Not Start
3.5"x5" to 18"x24"
S-8295
No Loose Clothing While Operating This Machine (with Graphic)
3.5"x5" to 12"x18"
S-6396

 Safety Signs - OSHA

Clean All Machines After Using
3.5"x5" to 10"x14"
S-2333
Clean Equipment And Tools After Use
3.5"x5" to 12"x18"
S-5710
Clean Machine After Use (with Graphic)
3.5"x5" to 10"x14"
S-2684
Clean Machine At The End Of Each Shift
3.5"x5" to 10"x14"
S-2685
Do Not Clean Or Repair Machinery While In Motion
3.5"x5" to 10"x14"
S-2686
Do Not Leave Machine Unattended
3.5"x5" to 10"x14"
S-2628
Do Not Operate Men Working On Repairs
3.5"x5" to 10"x14"
S-2689
Do Not Operate Men Working On Repairs
3.5"x5" to 10"x14"
S-2690
Do Not Operate Under Load
3.5"x5" to 10"x14"
S2-2853
Do Not Use This Equipment Unless: You Are Over 18 And You Have Been Trained On This Piece Of Equipment
3.5"x5" to 18"x24"
S-8358
Do Not Wear Gloves Or Loose Clothing While Operating This Equipment
3.5"x5" to 12"x18"
S-6397
Do Not Wear Loose Clothing While Operating This Machine
3.5"x5" to 10"x14"
S-2652
Equipment In Your Department Must Be Thoroughly Cleaned After Each Day's Work
3.5"x5" to 10"x14"
S-2334
Equipment Must Be Thoroughly Cleaned After Each Day's Work
3.5"x5" to 10"x14"
S-2335
Men Working Do Not Start
3.5"x5" to 10"x14"
S-2696
Please Clean Dryer Lint Trap After Each Use
3.5"x5" to 12"x18"
S-5967
You Must Be At Least 18 To Operate Or Clean Equipment
3.5"x5" to 18"x24"
S-8254